ISO 9809-1 Od-203mm Dw-5.4 Pw-200bar 23.6L Steel Gas Cylinder

Product Details
Customization: Available
Pressure: 10.0MPa≤p<100.0MPa
Pressure Level: High Pressure (10.0MPa≤p<100.0MPa)
Manufacturer/Factory, Trading Company, Group Corporation

360° Virtual Tour

Diamond Member Since 2013

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
10000000 RMB
Plant Area
>2000 square meters
  • ISO 9809-1 Od-203mm Dw-5.4 Pw-200bar 23.6L Steel Gas Cylinder
  • ISO 9809-1 Od-203mm Dw-5.4 Pw-200bar 23.6L Steel Gas Cylinder
  • ISO 9809-1 Od-203mm Dw-5.4 Pw-200bar 23.6L Steel Gas Cylinder
  • ISO 9809-1 Od-203mm Dw-5.4 Pw-200bar 23.6L Steel Gas Cylinder
  • ISO 9809-1 Od-203mm Dw-5.4 Pw-200bar 23.6L Steel Gas Cylinder
  • ISO 9809-1 Od-203mm Dw-5.4 Pw-200bar 23.6L Steel Gas Cylinder
Find Similar Products

Basic Info.

Model NO.
ISO 9809-1
Transport Package
Palletizing Container
Specification
13.4L~42L
Trademark
SEFIC
Origin
Shanghai, China (Mainland)

Product Description

NO Type Outside
Diameter
(mm)
Water
capacity
(L)
Height
(mm)
Weight
(kg)
Service
Pressure
(bar)
Test
Pressure
(bar)
Design wall
Thickness
(mm)
Certification
1 ISO203-13.4-200 203 13.4 580 20.5 200 300 5.4 TPED
2 ISO203-15.0-200 15.0 635 22.0
3 ISO203-18.0-200 18.0 740 25.0
4 ISO203-20.0-200 20.0 810 27.0
5 ISO203-23.0-200 23.0 915 30.0
6 ISO203-23.6-200 23.6 935 30.5
7 ISO203-25.0-200 25.0 985 32.0
8 ISO203-26.0-200 26.0 1020 33.0
9 ISO203-28.0-200 28.0 1090 35.0
10 ISO203-30.0-200 30.0 1160 37.0
11 ISO203-32.0-200 32.0 1230 39.0
12 ISO203-35.0-200 35.0 1335 42.0
13 ISO203-37.0-200 37.0 1405 44.0
14 ISO203-40.0-200 40.0 1510 47.0
15 ISO203-42.0-200 42.0 1580 49.0

1. Design accordingto: ISO9809-1: 2019 and EN ISO 9809-1:2019 .
2. Filling contents:compressed gases or liquified gases as per ISO11114-1.
3. Environmental temperature:-50ºC to 65ºC .
4. Material: 34CrMo4
5. Heat treatment:Quenched 860±15ºC for 30±5min and tempered 650±15ºC for 51±5min.
6. Working pressure:200bar.
7. Test pressure: 300bar.
8. Spun-tube cylinder.
9. Out of roundness shall not exceed 2% of the mean of the same cross-section diameter.
10. The maximum deviation of the cylindrical part of the shall from astraight line shall not e-xceed 3mm/m length.

ISO 9809-1 Od-203mm Dw-5.4 Pw-200bar 23.6L Steel Gas CylinderISO 9809-1 Od-203mm Dw-5.4 Pw-200bar 23.6L Steel Gas Cylinder
ISO 9809-1 Od-203mm Dw-5.4 Pw-200bar 23.6L Steel Gas Cylinder
ISO 9809-1 Od-203mm Dw-5.4 Pw-200bar 23.6L Steel Gas Cylinder
ISO 9809-1 Od-203mm Dw-5.4 Pw-200bar 23.6L Steel Gas Cylinder
 

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier